A floating catalyst is a promising method due to a one-step continuous process. The CNTs from the floating catalyst usually showed higher crystallinity, thinner diameter, and longer length, compared to CNTs from the substrate. Most previous studies correlated these properties of product with experimental conditions. However, the circumstances at CNT growth temperature is the most important point. Via in-situ TEM method, available circumstances can be observed.
Coarsening or melting of catalyst particles affect CNT growth depending on catalytic activity. Especially, sulfur is used to enhance the CNT growth in floating catalyst, so composition of catalyst particles also affect the behavior of particles.
(Collaborative research based on in-situ TEM)
All-solid-state Li ion battery has been studied to secure the safety from the possibility of explosion. In order to enhance the ability of battery, the charge/discharge mechanism and the degradation process should be studied in detail. Observation is the easiest and the most accurate way, and in-situ TEM method fits perfectly to reach a goal. Procedures: 1) Bulk cell preparation, 2) Micro-battery fabrication, and 3) TEM analysis at various electrical and thermal condition.
The CNTY is a hierarchically structured material (CNT-CNT bundle-CNTY). The behavior of CNTY is a result of summation of individual components' behavior, not simple elastic-plastic behavior describing the normal materials. Through this viewpoint, the behavior of CNTY can be categorized as straightening and slippage behaviors of components: 1) The internal structure of CNTY shows entangled network of components, so the components should be initially straightened to resist the applied force (straightening), 2) While the CNTs are much stronger and shorter than CNTY, the components are not extended, but slipped during deformation (slippage). Therefore, the structural arrangement and interaction type between components affect directly to the properties and behavior of CNTY.
The CNTY is macro form of CNTs which contain extraordinary properties. Direct spinning is one of production methods; forest spinning and solution spinning. Procedures: 1) Injecting carbon and catalyst precursors into furnace, 2) Formation of catalyst particles after thermal decomposition and agglomeration, 3) Growth of CNTs from these catalyst particles floating in furnace, 4) Entanglement of synthesized CNTs into hollow cylindrical intermidiate called CNT sock, and 5) Shrinkage and spinning the CNT sock into CNTY. This directly spun CNTYs usually have much lower properties than individual CNTs due to loose and porous structure. Additional physical and chemical treatments can enhance the properties of CNTY. Potentially, CNTY can overwhelm strength of carbon fiber and conductivity of metal.